The New T-Road Solid features an aggressive RS2 Cover with an inverted 2-piece Fe2 ionized core giving turning the corner a new meaning. I started with a 3.60oz Top Weight, a 2.25 in pin, along with the 1000-grit Abralon box finish. The layout was a 5” pin under my ring finger with the c.g 3” from the pap, needing a balance hole 1” down from my pap and off to the lanes. The 1st test was the PBA Shark pattern fresh out of the box a couple of quick adjustments moving right deeper into the 18-20 area we had no problem rolling through the pocket.The T-Road had no problem steering in thickest of juice, and without even a wiggle to the pocket, we bested them again and again ten to the pit. I quickly found another new peice for the winter sport league, a few different layout's this fall will do the trick on the demanding 4 patterns we use. I wanted to have a little fun so, I jumped a few pairs to right. The good old house pattern was no match for this Road warrior. A reaction that would layoff in the oil and still kick the corner's out with smooth transition from the wet to the dry on arrant shots to the outside of the target still findinig the middle of the 1-2 pocket for us lefties. I would suggest the T-Road Solid to anyone looking to Drive It Home this Summer or Fall!
Thanks to Steve Kloempken Director of Marketing Storm Products for the test ball. Also Mike Rose of Ace Mitchell for the drilling done at Bowler's World in Rochester, NY.